WILWOOD Lever Brake Proportioning Valve

SKU: 3120931356


15 in stock


WILWOOD Lever Brake Proportioning Valve

The new generation of adjustable proportioning valves combines the latest refinements to deliver precise pressure metering and strength from a compact forged billet design. Pressure adjustments range from 150-1200 PSI. This provides for a maximum decrease of 57% in line pressure, the most of any available valve. Valve has six preset points actuated by moving a lever allowing racers to quickly adjust brake bias during a race. The lever “clicks” into the six positions for positive adjustment. This is great for cars which must run a single master cylinder instead of a twin master cylinder with balance bar setup. Install the valve in the rear brake line to reduce the amount of pressure at the rear brakes, reducing rear lockup under heavy braking.

Valves are supplied with two 1/8-27 NPT to 3/8-24 inverted flare female fittings that will fit most 3/16th hard brake lines.

Maximum Pressure Reduction       57%

Inlet/Outlet Ports                            1/8-27 NPT

Mounting Hole Diameter                 .250 inch

Mounting Hole Spacing                   1.00 inch

Weight                                             6.1 ounce

Adjustable Brake Proportioning Valve – Revolution Racegear

REMEMBER – Proportioning valves are used to reduce the brake fluid pressure to the rear brakes.


Additional information

Weight .3 kg
Dimensions 23 × 16 × 5 cm